24 Tooth Carbide Tip Saw Blade (3-1/4 Inch Dia., 10 mm hole)

Name: 24 Tooth Carbide Tip Saw Blade (3-1/4 Inch Dia., 10 mm hole)
Brand: SHANGHAI INTER-SIEG CO
SKU: 80465
Price: 49.95 USD
Availability: InStock

$49.95 USD

Shipping calculated at checkout.

SKU

80465

Quantity

Our Price

Fits MicroLux Table Saw and Heavy Duty Miter/Chop Saw

‚

A Micro-Mark Exclusive
24 tooth carbide-tipped saw blade
Make smooth cuts in softwood, plywood, hardwood up to 1 inch thick
Cuts plastic over 1/16 inch thick and thin soft brass and aluminum
3-‚¼ inch (85 mm) diameter blade with 10 mm hole

WARNING: This product can expose you to chemicals, including Wood Dust which is known to the State of California to cause cancer. For more information, go to: www.p65warnings.ca.gov

More Product Details

24 tooth carbide tip blade, .070 inch kerf. 3-1/4 inch diameter; 10mm hole. For super-smooth cuts in all softwood, plywood and hardwood up to 1 inch thick, plastic over 1/16 inch thick, plus thin soft brass and aluminum.

Instructions

24 Tooth Carbide Tip Saw Blade (3-1/4 Inch Dia., 10 mm hole)

Shipping & Returns

We hope you will be completely satisfied with your order...but, if an item does not meet your expectations, you may return it in as-new condition within 30 days of delivery for a replacement, exchange or refund of the purchase price.

You may want to know...

Brand: MicroLux

Item Weight: 0.1 lb

Item Dimensions: 3.5 x 3.5 x 0.01 inches

List Price: $50.95

Manufacturer ETA:

Most orders are shipped complete within 2 business days; however, if we must ship a partial order due to an out-of-stock situation, merchandise will not be charged to your credit card until shipment is made.

Good quality foam clay

Unlike any air dry clay I've used .
Very easy to manipulate , doesn't stick to your fingers .
Can be made into paper thin sheets that hold their shape .

Thick sections will take well over 24 hours to dry out ; high water weight when fresh .
Evaporation slows down considerably once the outer " crust " dries on thick pieces .

After 24 hours @ 78 degrees and about 60% humidity , the 3.1 gram sample I experimented with weighs 1.2 grams .
.. and after 48 hrs weighs just 1/2 gram ,, and I don't think it's fully dry yet .

Definitely worth the price .
Very versatile .

My only complaint is the bag it comes in .
It is a zipper lock bag but you need to remove a fair amount of the product before you'll be able to engage the zipper .
It's stuffed full when new .
I fit the bag into a plastic container ( Folgers coffee 43.5oz can ) with an inch of water at the bottom to ensure it doesn't dry out until I use enough to be able to close the bag .
Most likely keep it in that can regardless , just to be safe .

Quality miniature model paint

This stuff is comparable to Vallejo paints which everyone in the hobby already knows are tried and true. I honestly would not be able to tell the difference between the 2 brands looking at a finished model or trying to paint with it. The price is about the same but this includes slightly bigger bottles with a better design on the lid and seem to come with a plastic mixer ball already inside but its hard to tell for sure. This paint set also includes a paint thinner and cleaner for airbrushing. Its really hard to beat the price and value of this paint set for anyone wanting to have a quality paint job on something. I would say its near impossible.

A reasonably competent tool!

Works reasonably well for the low cost. I found it boggs down with very little pressure in hardwood, so a light touch is required for small carvings. The diamond point does do a nice job etching on steel, however. I found I had good control of the etching process using it on steel tools.

I bought an accessory pack of two additional bits with the tool.

24 Tooth Carbide Tip Saw Blade (3-1/4 Inch Dia., 10 mm hole)

Fits MicroLux Table Saw and Heavy Duty Miter/Chop Saw

You may want to know...

Customer Reviews

Let customers speak for us