An ultra-dense material designed for protection against radiation
GMASS Tungsten is an ultra-dense material designed for protection against radiation. Compared to traditional methods of shielding, it offers equivalent shielding with a 10x cost reduction. With the density of Tungsten you can print parts you would otherwise have to sinter. Surface Treatment Requirement: This material can permanently bond with glass resulting in damage not covered under warranty. Always use a surface treatment such as blue painter's tape whenever using this material.
RECOMMENDED USE: Radioactive Sample Shielding
Weights and Ballast
- 750 G Spool
- 1.75mm diameter
- Hardness: 81D
- Density: 4 g/cm3
Note: Heated bed required.