Description
Install a decoder in each locomotive you want to control with your DCC system. Easy instructions included. (For DC powered trains only. Not for use with Lionel or similar).
G Scale Decoder (MRC model AD324) features:
- 8.0 amp capacity 2 wired quick-disconnect plugs for easy installation
- Suitable for locomotives with either 1 or 2 motors
- Programmable for either 2-digit or 4-digit addresses
- Programmable start voltage, acceleration rate, deceleration rate, top voltage and 14, 28 or 128 speed steps
- Directional lighting control for front and rear lights at 0.2 amp rate
- Easy setting 'Rule 17' lighting, ditch, strobe and Mars lights
- 4 accessory functions (F1 to F4) at 0.1 amp rate
- Supports advanced consisting (CV-19) and programming on main
- Compatible with NMRA DCC standard
- Size: 3.464 inches long x 1.417 inches wide x .905 inch high
View instructions