Description
Install a decoder in each locomotive or accessory you want to control with your DCC system. Easy instructions included.
Decoder features:
- 1.5 amp capacity
- Built-in NMRA DCC plug
- Programmable for either 2-digit or 4-digit addresses
- Programmable start voltage, acceleration rate, deceleration rate, top voltage and 14, 28 or 128 speed steps
- Directional lighting at 0.1 amp rate
- Easy setting 'Rule 17' lighting, ditch, strobe and Mars lights
- 2 accessory functions (ACC1 and ACC2) at 0.1 amp rate
- Supports advanced consisting (CV-19) and programming on main
- Compatible with NMRA DCC standard
- Size: Approx. 1 inch long x 5/8 inch wide x 1/4 inch thick