Description
Install a decoder in each locomotive you want to control with your DCC system. Easy instructions included. (For DC powered trains only. Not for use with Lionel or similar).
HO Scale Decoder (MRC model 1651) features:
- 1.5 amp capacity
- Built-in NMRA DCC plug
- Programmable for either 2-digit or 4-digit addresses
- Programmable start voltage, acceleration rate, deceleration rate, top voltage and 14, 28 or 128 speed steps
- Directional lighting at 0.1 amp rate
- Easy setting 'Rule 17' lighting, ditch, strobe and Mars lights
- 2 accessory functions (ACC1 and ACC2) at 0.1 amp rate
- Supports advanced consisting (CV-19) and programming on main
- Compatible with NMRA DCC standard
- Size: 1.074 inches long x .594 inch wide x .205 inch thick
View instructions for decoder installation