Description
Our two-part liquid RTV (Room Temperature Vulcanizing...cures without heat) silicone mold rubber is ideal for making duplicate parts with our casting resins. To make a mold, mix parts A and B together and pour into a mold box containing your pattern. After curing, the mold is soft and pliable and reproduces every detail of your pattern. And, because it is genuine silicone rubber (withstands up to 600 degrees F), you can use these molds to cast small metal parts with our low-temperature alloys. Instructions for making molds are included.
ONE-to-ONE / RAPID is an economical general purpose mold rubber that is easy to mix: Simply stir equal volumes of A and B together and pour. Use over and over to make many resin castings, even those with slight undercuts. 30 minute 'pot' life, 4 hour cure. De-airs without vacuum. 3.2 lb. kit contains approx. 32 fl. oz. total material.
View instructionsClick here for an overview of casting techniques using Micro-Mark products