Typhoon Burr, Fine (1/4 Inch Dia. x 1/2 Inch, 1/8 Inch Shank)
Typhoon Burr, Fine (1/4 Inch Dia. x 1/2 Inch, 1/8 Inch Shank)
Starting at
$18.95
|
| Your Cart- See Sale Price |
We've added this item to your cart to show you the sale price.
Sometimes, manufacturers
require that products be advertised at their suggested retail price. When we choose to
sell these items for less, we can display the sale price only in the shopping cart.
|
|
| List Price: |
|
|
Super Buy Price: |
|
|
|
Description
Carbide Burrs Remove Stock QuicklyUnique structurally aligned tungsten carbide points remove stock faster and leave a smoother finish than other types of tungsten carbide burrs. Typhoon Burrs also last longer and do not load up quickly. Ideal for use on hard and soft woods, plastic, fiberglass and rubber. Use coarse burrs for rapid stock removal and fine burrs for finishing work. 1/8 inch shanks. |
| Item # | Fig | Dia | Length | Grit | | Item # | Fig | Dia | Length | Grit |
| 81957 | A | 1/4 inch | 1/2 inch | COARSE | | 81963 | C | 1/2 inch | 1/8 inch | COARSE |
| 81958 | A | 1/4 inch | 1/2 inch | FINE | | 81964 | C | 1/2 inch | 1/8 inch | FINE |
| 81959 | B | 1/8 inch | 3/4 inch | COARSE | | 81965 | C | 3/4 inch | 1/8 inch | COARSE |
| 81960 | B | 1/8 inch | 3/4 inch | FINE | | 81966 | C | 3/4 inch | 1/8 inch | FINE |
| 81961 | B | 1/4 inch | 1/2 inch | COARSE | | 82657 | D | 1/2 inch | 3/8 inch | COARSE |
| 81962 | B | 1/4 inch | 1/2 inch | FINE | | 82658 | D | 1/2 inch | 3/8 inch | FINE |