Add Raised (3D) Rivet Heads and Other Details to Any Surface . . . Easily, Quickly and Economically!
One of the most difficult, cumbersome and tedious of all building tasks has been the addition of surface details, such as rivet heads, to model surfaces. Rivet patterns had to be planned, fixtured, then embossed by mechanical means on flat surfaces, which later had to be formed into final shape. Make one mistake, and all your hard work had to be discarded. To solve this problem, Micro-Mark, in a 4-year program, directed its engineering talents into producing yet another revolutionary model building technique: a way to apply these surface details quickly, easily and inexpensively. We've developed a way to produce scale size, raised rivet heads and other surface details, such as grillwork and louvers, realistically 3-dimensioned and contoured, on the surface of our blank decal paper. To add this detail to your model, simply cut out and apply like any other decal...it's that easy! Apply under or over paint to produce the exact effect you desire. Apply to plastic, wood, metal or any other surfaces...up and over curved surfaces as well as in the flat. Apply to model railroad equipment sides, ends, floors and roofs. Apply to military models, model buildings, bridges, watercraft and airplanes. Figure modelers can use our surface details as buttons and other details. The decals can be shifted during application for precise location, or, if you wish to make a change, simply clean them from the surface of the model and start again. They're also economical...each package contains over 118 square inches (two large decal sheets) of several different rivet patterns in both straight lines and curves, plus bonus louvers and grillwork. Although described as for HO scale (typically for model railroad use), they are useful across various scales for the type and size of surface details needed for your model.
Made in the USA.