|
Assemble your paint handle
according to the diagram. Note
that the rubber pads are applied
to the OUTSIDE surface of the
handle. The handle holds the
model from the inside. Adjust the wing
nut so that the handle provides just enough
force to hold your model without
distorting it. You may bend the
handle to any shape necessary
to hold a model, but avoid repeated
sharp bends or the handle may fracture.
After painting your model, hang the handle
on a hook until the paint dries. (You may also
hold one leg of the handle in a bench
vise while waiting for the paint
to dry).
|
