 |
| These adhesive-backed papers stick best to clean, smooth, dry surfaces. We recommend that you apply a seal coat, such as paint or clear acrylic/laquer, to porous surfaces, such as wood, so that the papers adhere properly. Cut paper to size and test fit. Remove from surface, then peel off the backing paper to expose the pressure-sensitive adhesive. Carefully press back in place with your fingers. After application, the papers may be weathered with dry powdered colors/chalks (we recommend Doc O'Brien's Weathering Powders...Micro-Mark #81632), or with light applications of paint from an airbrush. Please do not brush liquids onto the surface, as they will cause the image to smear and/or run. | |
Go to #82898 HO Scale Red Brick Catalog Page
Go to #82899 O Scale Red Brick Catalog Page
Go to #83105 HO Scale Cinder Block Catalog Page
Go to #83106 O Scale Cinder Block Catalog Page
Go to #83135 HO Scale Random Stone Catalog Page
Go to #83136 O Scale Random Stone Catalog Page
Go to #83140 HO Scale Yellow Brick Catalog Page
Go to #83141 O Scale Yellow Brick Catalog Page
Go to #83142 HO Scale Brown Cut Stone Catalog Page
Go to #83143 O Scale Brown Cut Stone Catalog Page
Go to #83188 HO Scale Gray Cut Stone Catalog Page
Go to #83189 O Scale Gray Cut Stone Catalog Page
Go to #83218 HO Scale Medium Gray Roof Shingle Catalog Page
Go to #83219 O Scale Medium Gray Roof Shingle Catalog Page
Go to #83220 HO Scale Dark Green Roof Shingle Catalog Page
Go to #83221 O Scale Dark Green Roof Shingle Catalog Page
Go to #83222 HO Scale Dark Brown Roof Shingle Catalog Page
Go to #83223 O Scale Dark Brown Roof Shingle Catalog Page
Go to #83224 HO Scale Dark Red Roof Shingle Catalog Page
Go to #83225 O Scale Dark Red Roof Shingle Catalog Page
Go to #83405 HO Scale Cobblestone Catalog Page
Go to #83406 O Scale Cobblestone Catalog Page