MicroLux Attachments & Accessories

MicroLux Attachments & Accessories

Page: 1
 
Item # 15117
Drive Belt for use with #81631 MicroLux Drill Press.
Our Price $6.95

Item # 15118
Grooved base fits on MicroLux #81631 Standard Duty Drill Press sliding gauge mount with clamps to #82389 X-Y Table. Made of cast aluminum...
Our Price $22.25

Item # 15237
Replacement cutter fits #15228 MicroLux Power Plane.
Our Price $22.15

Item # 15238
3-Jaw Keyless Chuck. Use in place of collets for quicker change of bits. 1/64 to 1/8 inch capacity. Designed for use with #82376 MicroLux Right Angle...
Our Price $10.80

Item # 15239
80 grit sanding belt designed for use with #15299 MicroLux Belt Sander.
Our Price $2.80

Item # 15240
120 grit sanding belt designed for use with #15229 MicroLux Belt Sander.
Our Price $2.80

Item # 15244
10 fine blades designed for use with #15226 MicroLux Jigsaw/Scroll Saw and #82088 MIcroLux Cross Saw.
Our Price $6.70

Item # 15247
10 sheets peel-and-stick sandpaper in assorted grits for use with #15225 MicroLux Orbital Sander.
Our Price $6.35

Item # 15248
Sander pad snaps on/off. Lets you keep different grits mounted and ready to use. Designed for use with #15225 MicroLux Orbital Sander.
Our Price $5.65

Item # 15252
Diamond blade for micro filing and grinding of almost any material. Designed for use with #15226 MicroLux Jigsaw/Scroll Saw and #82088 MicroLux Cross...
Our Price $11.30

Item # 70224
Trial and error cutting of narrow stripwood is time consuming and costly. Our Brass Ripping Gauges save you time and money. Just place the correct...
Our Price $12.95

Item # 80467
Accuriser II for the MicroLux Tilt Arbor Saw Gives You Close Tolerance, Super-Accurate Rip Cuts Rip stock to precise tolerances with this vernier...
List Price $69.95
Our Price $59.95

Item # 80468
Sliding Table Makes Precise Crosscuts Guides on the bottom of the table slide in the grooves of the saw. The wide fence gives your work more support...
Our Price $23.95

Item # 80605
This beautifully machined Taper Jig is used whenever you need to make a wood or plastic part with an angle cut on its long dimension. Adjusts easily...
Our Price $18.95

Item # 80793
Size MXL (1/4 inch wide) for older models. Please check old drive belt before ordering. View instructions
Our Price $9.50

Item # 80850
Size XL (3/8 inch wide) for our newest models. Please check old drive belt before ordering. View instructions
Our Price $9.50

Item # 80898
Make your MicroLux Table Saw more versatile. The support provided by a high fence allows you to make cuts that are safer, easier and more accurate....
Our Price $39.75

Item # 80899
Laser cut wood fingers only. Holds stock tight against rip fence. Made of hardwood.
Our Price $7.75

Item # 80900
Laser cut wood fingers only. Mounts to high fence. Flexible fingers hold stock tight against saw table and help prevent kick-back. Made of hardwood.
Our Price $7.75

Item # 80996
Dado/Slot Washers for the Microlux Saw Special washers mount behind the blade to cut perfect 1/16 inch, 3/32 inch, 1/8 inch and 3/16 inch wide dado...
Our Price $16.95

Item # 81387
This specially formed steel bracket attaches to the bottom of your MIcroLux saw, providing a quick and simple way to mount it to a work table. Two...
Our Price $26.60

Item # 82118
Blank Blade Plates for the MicroLux Tilt Arbor Saw are Ideal for Cutting Thin Strips of Wood The MicroLux Tilt Arbor Saw has a gap alongside the...
Our Price $9.95

Item # 82211
A cooling system is required when cutting stone, tile, ceramics, gems, minerals, glass and other hard materials with your band saw and a diamond...
Our Price $39.95

Item # 82377
2 each of 60, 120 and 240 grit peel-and-stick sanding disks. 2-3/8 inches dia. Designed for use with #82376 MIcroLux Right Angle Disk Sander/Drill.
Our Price $6.15

Item # 82378
Flexible disk mounting wheels for finishing curved surfaces (very useful on gourds). Lets you keep sanding disks of different grits mounted and ready...
Our Price $9.80

Item # 82379
Semi-rigid disk mounting wheels for finishing flat surfaces. Lets you keep sanding disks of different grits mounted and ready to use. Set of 3....
Our Price $9.80

Item # 82389
X-Y Table Attachment Increases Accuracy by 30 Times! The MicroLux X-Y Table Attachment increases the accuracy of hole locations to within .0005 inch...
List Price $129.95
Our Price $99.95

Item # 82412
Variable speed foot-operated rheostat for drill press lets you adjust motor speed to suit material and drill size. Includes accessory socket for...
Our Price $19.95

Item # 82689
Rocker Tool Post lets you adjust position of tool bit to exact center of workpiece without shimming. Compensates for worn or resharpened cutting...
Our Price $28.90

Item # 82960
Extra drive belt designed for use with #82959 MicroLux Heavy Duty Variable Speed Drill Press with Digital Depthfinder.
Our Price $6.95

Item # 82996
Drive Belt fits MicroLux #82995 8 x 12 Wood Lathe.
Our Price $4.95

Item # 84051

Put a New Edge on Your Work

Recover unevenly cut wood or put a new edge on a part with our Straighten It table saw guide. Use the three thumb...
Our Price $14.95

Item # 84317
This Heavy Duty, 5 amp output, Variable Speed Transformer provides the 12v DC power for all our palm-size miniature power tools, but is especially...
List Price $69.65
Our Price $57.50

Item # 84563
10 coarse blades designed for use with #15226 MicroLux Jigsaw/Scroll Saw and #82088 MicroLux Cross Saw. (This item replaces item #15243.)
Our Price $6.70

 
Page: 1
Powered by BCF Commerce – Phoenix Systems Group, Inc.