• Home
  • 1 Lb. tglase PETT 3D Printer Filament, Clear, 1.75 mm

1 Lb. tglase PETT 3D Printer Filament, Clear, 1.75 mm

Item #: 87188
Our Price $37.95
Our Price $37.95
A highly flexible and high-strength material derived from PET

Taulman tglase PETT is a highly flexible and high-strength material derived from PET. This material is considered “water clear,” as opposed to transparent; the material is reflective, and unlike other polymers it won’t degrade with time. tglase PETT is environmentally friendly, recyclable, and does not emit fumes. It is well suited for large prints due to its low shrinkage characteristics. The combination of transparency and strength make it a great material for a wide range of industrial, prototyping, and hobbyist applications. 

Surface Treatment Requirement: This material can permanently bond with glass resulting in damage not covered under warranty. Always use a surface treatment such as blue painter's tape whenever using this material.

RECOMMENDED USES:

  • Large parts, casings, and cowlings 

  • Functional prototypes 

  • Optical paths and light pipes

SPECIFICATIONS:

  • 1 lb. spool

  • 1.75 mm diameter

  • Tensile stress: 4516 psi 

  • Elongation at breakage: 7.8%

  • Tensile Modulus: 80315 ps

  • Available colors: clear or black


Suggested extrusion temperature: 232-238°C


Filament TypeColor Choices Available Suggested Extrusion TemperatureHeated Bed Needed?Bed TempStrengthTypical UsesNozzle Size Needed
ABS0230-240°CRequired110°C★★★Consumer products (Emits toxic fumes) unless Eco-Friendly0.4
DURA6175°CNot RequiredN/A★★★Replacement for ABS Strong, temperature resistant 3D parts0.4
PLA10180-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.N/A★★Consumer products0.4
Advanced PLA10195°CNot RequiredN/A★★Strong, temperature resistant 3D parts0.4
WoodFill PLA1195-220°CNot RequiredN/ADesign and prototyping, Decorative work0.4
BronzeFill PLA1195-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.55-60°C ★★Jewelry, Sculptures, Minitures.0.4
CopperFill PLA1195-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.50-60°C ★★Jewelry, Sculptures, Trophies0.4
Stainless Steel PLA1195-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.55-60°C ★★Jewelry, Sculptures, Trophies, Crafting0.4
Magnetic Iron PLA1190-210°CAdvised (not required)60-70°C ★★Scensor Components, Compasses, Shielding0.6
Carbon Fiber PLA1195-220°CNot RequiredN/A★★Functional Prototypes, Automotive, frames, supports, propellers, drone parts and tools0.4
Conductive PLA1215-230°CNot RequiredN/A★★Functional Prototypes, toys and game0.4
Alloy 910 Filament1250-255°CNot RequiredN/A★★★Robotics, Jigs and Fixtures0.4
Bridge Nylon1250-255°CRequired70-80°C ★★★Prosthesis, Robotic Assemblies 0.4
NinjaFlex5225-235°CRequired20-50°C ★★★Phone cases, toys, molded parts0.4
SemiFlex 1225-235°CNot RequiredN/A★★★Prototypes , Unsupported Vertical Printing0.4
GMASS Bismuth1200-230°CTo improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.100°C ★★Radiation shielding for imaging ,Vibration dampening , Laboratory equipment0.6
GMAS Tungsten1200-230°CTo improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.100°C ★★Sporting goods, weighting, balancing, x-ray shielding, lab equipment, reactor shielding, vibration dampening and inertial weighting0.6
iGUSi1801220-250°CRequired90-110°C ★★Small batch manufacturing, Prototyping, Motion components, Bearings, Test Rigs0.4
PCTPE1230-245°CRecommended Glass Plate45°C ★★Bumpers, baffles, dampeners, Flexible structural components, Functional components 0.4
TechGPettG1235-242°CMust use a surface treatment such as blue painters tape<68°C ★★Engineering projects that require strength and accuracy.0.4
tGlasePett2232-238°CMust use a surface treatment such as blue painters tape<68°C ★★★Industrial, Prototyping, and Hobbyist applications0.4
ALGA7195°CNot RequiredN/A★★Prototyping, educations, and artistic projects 0.4
OMNI6195°CNot RequiredN/A★★★Strong, temperature resistant 3D parts that out perform standard PLA and ABS resolution0.4

Customer Reviews of This Item

No reviews available

Be the first to Write a Review