500g Magnetic Iron PLA 3D Printer Filament, 1.75 mm

Item #: 87180
List Price $49.95
Sale Price $34.99
List Price $49.95
Sale Price $34.99

Magnetic Iron PLA is a ferromagnetic material which behaves as pure iron

Proto-pasta Magnetic Iron PLA 3D printer filament is a ferromagnetic material which behaves like pure iron - it even rusts for artistic effects! This material enables magnetically active projects, such as sensors and simple motors. Magnetic Iron PLA acts magnificently as a performance material, enabling a new frontier of creative projects and useful applications. A heated bed is not required for printing Magnetic Iron PLA, which has a unique metallic finish direct from the printer and can be polished to a shine. Perfect for robotic parts and jewelry as well!

RECOMMENDED USES:

  • Sensor components 

  • Compasses 

  • Shielding 

SPECIFICATIONS:

  • 500g Spool

  • 1.75 mm diameter

  • Behaves similar to pure iron

Note: Magnetic Iron PLA is more abrasive than standard PLA and may cause accelerated nozzle wear. We recommend a 0.6mm nozzle


Suggested extrusion temperature: 190-210°C


Filament TypeColor Choices Available Suggested Extrusion TemperatureHeated Bed Needed?Bed TempStrengthTypical UsesNozzle Size Needed
ABS0230-240°CRequired110°C★★★Consumer products (Emits toxic fumes) unless Eco-Friendly0.4
DURA6175°CNot RequiredN/A★★★Replacement for ABS Strong, temperature resistant 3D parts0.4
PLA10180-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.N/A★★Consumer products0.4
Advanced PLA10195°CNot RequiredN/A★★Strong, temperature resistant 3D parts0.4
WoodFill PLA1195-220°CNot RequiredN/ADesign and prototyping, Decorative work0.4
BronzeFill PLA1195-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.55-60°C ★★Jewelry, Sculptures, Minitures.0.4
CopperFill PLA1195-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.50-60°C ★★Jewelry, Sculptures, Trophies0.4
Stainless Steel PLA1195-220°CAdvised (not required). If not used, must use Blue painter's tape for bed adhesion.55-60°C ★★Jewelry, Sculptures, Trophies, Crafting0.4
Magnetic Iron PLA1190-210°CAdvised (not required)60-70°C ★★Scensor Components, Compasses, Shielding0.6
Carbon Fiber PLA1195-220°CNot RequiredN/A★★Functional Prototypes, Automotive, frames, supports, propellers, drone parts and tools0.4
Conductive PLA1215-230°CNot RequiredN/A★★Functional Prototypes, toys and game0.4
Alloy 910 Filament1250-255°CNot RequiredN/A★★★Robotics, Jigs and Fixtures0.4
Bridge Nylon1250-255°CRequired70-80°C ★★★Prosthesis, Robotic Assemblies 0.4
NinjaFlex5225-235°CRequired20-50°C ★★★Phone cases, toys, molded parts0.4
SemiFlex 1225-235°CNot RequiredN/A★★★Prototypes , Unsupported Vertical Printing0.4
GMASS Bismuth1200-230°CTo improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.100°C ★★Radiation shielding for imaging ,Vibration dampening , Laboratory equipment0.6
GMAS Tungsten1200-230°CTo improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.100°C ★★Sporting goods, weighting, balancing, x-ray shielding, lab equipment, reactor shielding, vibration dampening and inertial weighting0.6
iGUSi1801220-250°CRequired90-110°C ★★Small batch manufacturing, Prototyping, Motion components, Bearings, Test Rigs0.4
PCTPE1230-245°CRecommended Glass Plate45°C ★★Bumpers, baffles, dampeners, Flexible structural components, Functional components 0.4
TechGPettG1235-242°CMust use a surface treatment such as blue painters tape<68°C ★★Engineering projects that require strength and accuracy.0.4
tGlasePett2232-238°CMust use a surface treatment such as blue painters tape<68°C ★★★Industrial, Prototyping, and Hobbyist applications0.4
ALGA7195°CNot RequiredN/A★★Prototyping, educations, and artistic projects 0.4
OMNI6195°CNot RequiredN/A★★★Strong, temperature resistant 3D parts that out perform standard PLA and ABS resolution0.4

Customer Reviews of This Item

No reviews available

Be the first to Write a Review