Algix APLA 3D Printer Filament 1.75mm, 100g Coil
APLA, Specifically designed for trouble-free 3D printing!
ALGIX Advanced PLA 3D printer filament is the perfect material for your FFF 3D printing needs, because it is easy to use and outperforms conventional PLA and ABS in many areas. Advanced PLA filament is made from an improved PLA polymer specifically designed for 3D printing. It is made from a non-toxic resin which incorporates lactic acid derived from plant sugars and has a slightly sweet smell when processed. When using ALGIX 3D Advanced PLA, you can expect low odor, higher print detail/resolution, excellent first layer adhesion, improved adhesion between layers, reduced warping, curling and failed prints along with improved heat deflection, stiffness, strength, adhesion properties and 3D print quality.
- Increased heat resistance
- Exceptional resolution, less warping and curling.
- Heated bed not needed
- Improved stiffness and strength over PLA.
- Non-toxic and compostable
Suggested extrusion temperature: 195°C
|Filament Type||Color Choices Available||Suggested Extrusion Temperature||Heated Bed Needed?||Bed Temp||Strength||Typical Uses||Nozzle Size Needed|
|ABS||0||230-240°C||Required||110°C||★★★||Consumer products (Emits toxic fumes) unless Eco-Friendly||0.4|
|DURA||6||175°C||Not Required||N/A||★★★||Replacement for ABS Strong, temperature resistant 3D parts||0.4|
|PLA||10||180-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||N/A||★★||Consumer products||0.4|
|Advanced PLA||10||195°C||Not Required||N/A||★★||Strong, temperature resistant 3D parts||0.4|
|WoodFill PLA||1||195-220°C||Not Required||N/A||★||Design and prototyping, Decorative work||0.4|
|BronzeFill PLA||1||195-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||55-60°C||★★||Jewelry, Sculptures, Minitures.||0.4|
|CopperFill PLA||1||195-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||50-60°C||★★||Jewelry, Sculptures, Trophies||0.4|
|Stainless Steel PLA||1||195-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||55-60°C||★★||Jewelry, Sculptures, Trophies, Crafting||0.4|
|Magnetic Iron PLA||1||190-210°C||Advised (not required)||60-70°C||★★||Scensor Components, Compasses, Shielding||0.6|
|Carbon Fiber PLA||1||195-220°C||Not Required||N/A||★★||Functional Prototypes, Automotive, frames, supports, propellers, drone parts and tools||0.4|
|Conductive PLA||1||215-230°C||Not Required||N/A||★★||Functional Prototypes, toys and game||0.4|
|Alloy 910 Filament||1||250-255°C||Not Required||N/A||★★★||Robotics, Jigs and Fixtures||0.4|
|Bridge Nylon||1||250-255°C||Required||70-80°C||★★★||Prosthesis, Robotic Assemblies||0.4|
|NinjaFlex||5||225-235°C||Required||20-50°C||★★★||Phone cases, toys, molded parts||0.4|
|SemiFlex||1||225-235°C||Not Required||N/A||★★★||Prototypes , Unsupported Vertical Printing||0.4|
|GMASS Bismuth||1||200-230°C||To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.||100°C||★★||Radiation shielding for imaging ,Vibration dampening , Laboratory equipment||0.6|
|GMAS Tungsten||1||200-230°C||To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.||100°C||★★||Sporting goods, weighting, balancing, x-ray shielding, lab equipment, reactor shielding, vibration dampening and inertial weighting||0.6|
|iGUSi180||1||220-250°C||Required||90-110°C||★★||Small batch manufacturing, Prototyping, Motion components, Bearings, Test Rigs||0.4|
|PCTPE||1||230-245°C||Recommended Glass Plate||45°C||★★||Bumpers, baffles, dampeners, Flexible structural components, Functional components||0.4|
|TechGPettG||1||235-242°C||Must use a surface treatment such as blue painters tape||<68°C||★★||Engineering projects that require strength and accuracy.||0.4|
|tGlasePett||2||232-238°C||Must use a surface treatment such as blue painters tape||<68°C||★★★||Industrial, Prototyping, and Hobbyist applications||0.4|
|ALGA||7||195°C||Not Required||N/A||★★||Prototyping, educations, and artistic projects||0.4|
|OMNI||6||195°C||Not Required||N/A||★★★||Strong, temperature resistant 3D parts that out perform standard PLA and ABS resolution||0.4|