16 Bit Drop-In, DCC, HO Scale EMD 567 Decoder, Without Speaker, MRC No. 00111706
This high-quality EMD 567 drop-in sound decoder from MRC is designed as an affordable replacement for the original PC board in your locomotive.* All-in-one decoder controls speed, lights and sound (speaker not included; we recommend our #86693, available separately). Decoder is suitable for use in the following locomotive types: F2A/B, F3A/B, F7A/B, F9A/B, BL1, BL2, FP7, FL9, FT, GP7, GP9, GP18, GP28, E6, E7, E8, E9, NW2, NW3, NW4, SW1, SW7, SW8, SW9, SW600, SW900 and SW1200. Dimensions: 73.4 mm x 17.8 mm x 7.7 mm. Compatible with NMRA DCC standards.
Decoder features include: 1 synchronized prime mover sound • 16 bit • 1.5 amp capacity with overload/over-voltage protection • 3 accessory lights • 4 horns and 4 bells • adjustable master and 10 individual sound volumes (16 levels) • programmable 2-digit or 4-digit addressing, start voltage and top voltage, acceleration and deceleration rates and 14, 28, 128 speed steps • excellent slow speed control and adjustable back-EMF load control with adaptive PID control • user-controlled service and dynamic brakes with sound • supports read-back address and CV value • advanced speed table control CV67 - CV94 • kickstart voltage control CV65 • easy function mapping • 17 accessory light effects, including ditch lights, mars light, gyra light, strobe light, prime strobe light, and on/off • 28 accessory functions (F1 - F28) • supports advanced consisting and programming on the main (OPS mode) • 2 pin speaker connector included.
*Drop-in decoders may require some modification to locomotive.
WARNING: This product can expose you to chemicals, including Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to:www.p65warnings.ca.gov