Lab-Metal, 3/4 lb. Can
Lab-metal Spreads Like Paste and Hardens to Metal
Use Lab-Metal to easily finish and repair metal parts. Or, just spread from the can with a putty knife to form your own parts, repair holes, and make wood or plastic look like metal. Reaches maximum hardness in just 12 hours and, once dry, can be drilled, tapped, filed, sanded, and machined. Sticks tightly to wood, metal, plastic, glass, and most other materials. #80922 Should be purchased when buying #80921 Lab Metal. The manufacturer recommends that after opening the can, some solvent should be poured into the can in order of keeping the product fresh and lasting longer. When thinned with #80922, it allows the product to be “brushed-on”. Lab Metal is supplied in a 3/4 lb. can.
Note: Lab-metal is not conductive and can withstand a maximum temperature of 350 degrees F.
Ships by ground to 48 contiguous U.S. only.
WARNING: This product can expose you to chemicals, including Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to:www.p65warnings.ca.gov