Micro-Mark 3D Printer PLA Filament 1.75mm, 8 Pack
Micro-Mark’s PLA is a unique filament that can be used in any 3D printer on the market that uses a 1.75mm diameter filament!
Each spool is 1.65 pounds (750 grams). Micro-Mark’s lab is a testing ground for numerous 3D printers and filament varieties and Micro-Mark sells only the best printers and filaments after thorough testing. Micro-Mark PLA filament was developed after testing numerous filament types on the market today. We then designed the best features of what is available in the market.
Features of Micro-Mark’s PLA filament are:
- Quality of the finished product including resolution
- Ease in processing/Sticks to the bed
- Used with a wide diversity of 3D printers
- Low price
- Safe/No environmental impact
Micro-Mark PLA filament is made with natural ingredients including tapioca products and is safe to use around children and is safe for the environment. We have designed it to pass through the extruder without getting caught and to extrude evenly.
The recommended extrusion temperature is 195 to 230 degrees celsius so there is no need for a heated bed, although Micro-Mark PLA filament will work on a heated bed as well. We have found that Micro-Mark PLA filament delivers consistency across prints, brings out details of the features of the print, and delivers a cleaner surface finish.
The filament is great for plastic modeling, model train layouts, making figures, jewelry, and many other applications and hobbies.
|Filament Type||Color Choices Available||Suggested Extrusion Temperature||Heated Bed Needed?||Bed Temp||Strength||Typical Uses||Nozzle Size Needed|
|ABS||0||230-240°C||Required||110°C||★★★||Consumer products (Emits toxic fumes) unless Eco-Friendly||0.4|
|DURA||6||175°C||Not Required||N/A||★★★||Replacement for ABS Strong, temperature resistant 3D parts||0.4|
|PLA||10||180-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||N/A||★★||Consumer products||0.4|
|Advanced PLA||10||195°C||Not Required||N/A||★★||Strong, temperature resistant 3D parts||0.4|
|WoodFill PLA||1||195-220°C||Not Required||N/A||★||Design and prototyping, Decorative work||0.4|
|BronzeFill PLA||1||195-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||55-60°C||★★||Jewelry, Sculptures, Minitures.||0.4|
|CopperFill PLA||1||195-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||50-60°C||★★||Jewelry, Sculptures, Trophies||0.4|
|Stainless Steel PLA||1||195-220°C||Advised (not required). If not used, must use Blue painter's tape for bed adhesion.||55-60°C||★★||Jewelry, Sculptures, Trophies, Crafting||0.4|
|Magnetic Iron PLA||1||190-210°C||Advised (not required)||60-70°C||★★||Scensor Components, Compasses, Shielding||0.6|
|Carbon Fiber PLA||1||195-220°C||Not Required||N/A||★★||Functional Prototypes, Automotive, frames, supports, propellers, drone parts and tools||0.4|
|Conductive PLA||1||215-230°C||Not Required||N/A||★★||Functional Prototypes, toys and game||0.4|
|Alloy 910 Filament||1||250-255°C||Not Required||N/A||★★★||Robotics, Jigs and Fixtures||0.4|
|Bridge Nylon||1||250-255°C||Required||70-80°C||★★★||Prosthesis, Robotic Assemblies||0.4|
|NinjaFlex||5||225-235°C||Required||20-50°C||★★★||Phone cases, toys, molded parts||0.4|
|SemiFlex||1||225-235°C||Not Required||N/A||★★★||Prototypes , Unsupported Vertical Printing||0.4|
|GMASS Bismuth||1||200-230°C||To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.||100°C||★★||Radiation shielding for imaging ,Vibration dampening , Laboratory equipment||0.6|
|GMASS Tungsten||1||200-230°C||To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry.||100°C||★★||Sporting goods, weighting, balancing, x-ray shielding, lab equipment, reactor shielding, vibration dampening and inertial weighting||0.6|
|iGUS i180||1||220-250°C||Required||90-110°C||★★||Small batch manufacturing, Prototyping, Motion components, Bearings, Test Rigs||0.4|
|PCTPE||1||230-245°C||Recommended Glass Plate||45°C||★★||Bumpers, baffles, dampeners, Flexible structural components, Functional components||0.4|
|TechG PETG||1||235-242°C||Must use a surface treatment such as blue painters tape||<68°C||★★||Engineering projects that require strength and accuracy.||0.4|
|tglase PETT||2||232-238°C||Must use a surface treatment such as blue painters tape||<68°C||★★★||Industrial, Prototyping, and Hobbyist applications||0.4|
|ALGA||7||195°C||Not Required||N/A||★★||Prototyping, educations, and artistic projects||0.4|
|OMNI||6||195°C||Not Required||N/A||★★★||Strong, temperature resistant 3D parts that out perform standard PLA and ABS resolution||0.4|