1.8lb Dremel Nylon Filament, Black 1.75mm
Item #: 87900
Our Price $39.95
| Filament Type | Color Choices Available | Suggested Extrusion Temperature | Heated Bed Needed? | Bed Temp | Strength | Typical Uses | Nozzle Size Needed |
|---|---|---|---|---|---|---|---|
| ABS | 0 | 230-240°C | Required | 110°C | ★★★ | Consumer products (Emits toxic fumes) unless Eco-Friendly | 0.4 |
| DURA | 6 | 175°C | Not Required | N/A | ★★★ | Replacement for ABS Strong, temperature resistant 3D parts | 0.4 |
| PLA | 10 | 180-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | N/A | ★★ | Consumer products | 0.4 |
| Advanced PLA | 10 | 195°C | Not Required | N/A | ★★ | Strong, temperature resistant 3D parts | 0.4 |
| WoodFill PLA | 1 | 195-220°C | Not Required | N/A | ★ | Design and prototyping, Decorative work | 0.4 |
| BronzeFill PLA | 1 | 195-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | 55-60°C | ★★ | Jewelry, Sculptures, Minitures. | 0.4 |
| CopperFill PLA | 1 | 195-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | 50-60°C | ★★ | Jewelry, Sculptures, Trophies | 0.4 |
| Stainless Steel PLA | 1 | 195-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | 55-60°C | ★★ | Jewelry, Sculptures, Trophies, Crafting | 0.4 |
| Magnetic Iron PLA | 1 | 190-210°C | Advised (not required) | 60-70°C | ★★ | Scensor Components, Compasses, Shielding | 0.6 |
| Carbon Fiber PLA | 1 | 195-220°C | Not Required | N/A | ★★ | Functional Prototypes, Automotive, frames, supports, propellers, drone parts and tools | 0.4 |
| Conductive PLA | 1 | 215-230°C | Not Required | N/A | ★★ | Functional Prototypes, toys and game | 0.4 |
| Alloy 910 Filament | 1 | 250-255°C | Not Required | N/A | ★★★ | Robotics, Jigs and Fixtures | 0.4 |
| Bridge Nylon | 1 | 250-255°C | Required | 70-80°C | ★★★ | Prosthesis, Robotic Assemblies | 0.4 |
| NinjaFlex | 5 | 225-235°C | Required | 20-50°C | ★★★ | Phone cases, toys, molded parts | 0.4 |
| SemiFlex | 1 | 225-235°C | Not Required | N/A | ★★★ | Prototypes , Unsupported Vertical Printing | 0.4 |
| GMASS Bismuth | 1 | 200-230°C | To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry. | 100°C | ★★ | Radiation shielding for imaging ,Vibration dampening , Laboratory equipment | 0.6 |
| GMASS Tungsten | 1 | 200-230°C | To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry. | 100°C | ★★ | Sporting goods, weighting, balancing, x-ray shielding, lab equipment, reactor shielding, vibration dampening and inertial weighting | 0.6 |
| iGUS i180 | 1 | 220-250°C | Required | 90-110°C | ★★ | Small batch manufacturing, Prototyping, Motion components, Bearings, Test Rigs | 0.4 |
| PCTPE | 1 | 230-245°C | Recommended Glass Plate | 45°C | ★★ | Bumpers, baffles, dampeners, Flexible structural components, Functional components | 0.4 |
| TechG PETG | 1 | 235-242°C | Must use a surface treatment such as blue painters tape | <68°C | ★★ | Engineering projects that require strength and accuracy. | 0.4 |
| tglase PETT | 2 | 232-238°C | Must use a surface treatment such as blue painters tape | <68°C | ★★★ | Industrial, Prototyping, and Hobbyist applications | 0.4 |
| ALGA | 7 | 195°C | Not Required | N/A | ★★ | Prototyping, educations, and artistic projects | 0.4 |
| OMNI | 6 | 195°C | Not Required | N/A | ★★★ | Strong, temperature resistant 3D parts that out perform standard PLA and ABS resolution | 0.4 |
WARNING: This product can expose you to chemicals including Benzene which is known to known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov