Printed Graduations Beaker Value Set, 1000 - 2000 Milliliters
Lab quality large mixing beakers are a necessity when mixing large amounts of resins, rubbers and plaster materials for single or multiple mold filling.
These superior quality, reusable thick-wall polypropylene containers will make it easier than ever before. For example: fill 2 beakers (16 oz.) one with Part A and the other with Part B, mix them individually and then combine them both into 1 wide-mouth 32 oz. beaker for the final mixing. Also, they are designed with integrated non-drip low form tapered pour spouts to facilitate the transfer of materials so you can pour a thin line helping to eliminate the bubbles that create air pockets in rubbers and resins.
- 2 Each Printed Graduations Beaker, 1000 Milliliter (32oz)
- 1 Each Printed Graduations Beaker, 2000 Milliliter (67oz)
The filling of each container to the top line leaves about 1” approximately from the top of the container allowing thorough mixing without spilling. Leftover combined material can dry inside the containers and once dry be easily peeled off and removed or washed and ragged / wiped out of single part used beakers for reuse. Made by Kartell in Italy. FDA Compliant. Low form and wide mouth.
Note: If you use both Platinum and Tin based rubber molding materials, it is best that you order additional containers so as not to cross contaminate the materials which would affect curing performance.