Same Stuff & Applicator
SAME STUFF...Liquid Plastic Welder Formulated for the Plastic Modeler
Exactly the same as ProWeld and Tenax-7R, except for the name!
Solvent-type cement uses capillary action to weld styrene, acrylic, butyrate and ABS plastic. To apply, place the parts together and then put a drop on the seam with the included Touch-N-Flow applicator. Hold for 15 seconds. In that amount of time, SAME STUFF bonds and starts to cure. This method is far superior to thicker plastic cement which is messy, harder to control and can damage expensive model kits. Set includes 4 oz. of SAME STUFF plus the Touch-N-Flow applicator described below.
The Touch-N-Flow Applicator lets you apply just the amount of liquid plastic cement, glue or C/A accelerator you need. How it works: Capillary action draws liquid into the glass tube. Touching the micro-tip to the joint causes the liquid to flow from the tube. Application is easily controlled and precisely positioned.
WARNING: This product can expose you to chemicals, including Methylene Chloride which is known to the State of California to cause cancer. For more information, go to: www.p65warnings.ca.gov