Customer Reviews Of This Item

Average:
2 Reviews
Combination Machine Shears, Bends and Curves Metal, Wood and Plastic Sheet


  • One machine with 3 functions; a shear, bending break, and slip roll all-in-one
  • Works with metal, wood, and plastic sheets; also bends metal tubing
  • 3-roller slip roll forms curves, cylinders, and cones
  • Versatile, powerful, with precise; only takes up 16”x7”x10.5” benchtop space
  • Center brake bends up to 90 degrees and 4 adjustable dies can make compound bends.


Scroll down for more info

Download Instructions

FEATURED VIDEO

3-in-1 Metal Worker

3-in-1 Metal Worker

Item #: 86556
$269.96

This item is backordered from our supplier. We will ship as soon as it is received. Your credit card will not be charged until shipped. Please Note: For shipments to locations outside the USA, backordered items must be placed on separate orders.

Customer Reviews Of This Item

Average:

Details

Combination Machine Shears, Bends and Curves Metal, Wood and Plastic Sheet


  • One machine with 3 functions; a shear, bending break, and slip roll all-in-one
  • Works with metal, wood, and plastic sheets; also bends metal tubing
  • 3-roller slip roll forms curves, cylinders, and cones
  • Versatile, powerful, with precise; only takes up 16”x7”x10.5” benchtop space
  • Center brake bends up to 90 degrees and 4 adjustable dies can make compound bends.


Download Instructions

FEATURED VIDEO

3-in-1 Metal Worker

Our 3-in-1 Metal Worker combines three metal and plastic sheet fabrication tools into a single, compact, bench-top machine: shear, bending brake and slip roll. Turning the crank shears metal and plastic sheet to exact length. The center bending brake makes bends up to 90 degrees, and contains 4 adjustable V-shaped carbon steel dies for making compound bends. The 3-roller slip roll forms curves, cylinders and cones in metal and plastic sheet, and forms gentle curves in wood sheet and metal tubing. Includes positioning guide for square cuts, spring-loaded shear hold-down plate, and depth stop for making duplicate parts. Maximum sheet thickness: 1/32 inch. Maximum width of shear/brake/roll: 8 inches. Crank can be moved from one end to the other. Fully adjustable for precision fabrication.

Overall size: 16 inches wide x 7 inches deep x 10-1/2 inches high. Weight: 39 lbs.

Ratings & Reviews

2 reviews

  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews
3/28/2019 9:55 am

Nice Tool

by JL -

I ordered this bender a year ago and while it does not get a lot of use It does a great deal of precision work. I did remove the automatic hold down as it is difficult to see where I was cutting. I wish there was a straight edge on the table but it's easy enough to position a square.

4/18/2022 10:10 pm

Nice packaging for shipment. It’s not ready to use out of the box.

by Jim

There are 6 or 7 part that need to be installed, you’ll need a few metric tools that aren’t included. Good setup/part and operator manual.
The shear and the brake didn’t work as they were not adjusted properly. The alignment guide block in the front right corner of the table was cockeyed with one of the allen screw heads stripped.
I would suggest you take most of the machine apart to clean off the excessive amount of grease before you start assembling the misc parts. If you live in a humid environment wipe a very thin coat of oil on most of the parts.
To answer another user’s question it will do box bends, there are 4 different size brake fingers for this purpose.
Over all it’s a good hobby machine, I’m not disappointed with it.