See Video
Great on most plastic models, car moldings, and vinyl repairs. The joint can be filed and sanded in a minute or so, allowing extra fast assembly.
- Medium-viscosity formula brush-on CA glue
- Cures clean and clear
- Will not attack paint
- Works on most plastics and vinyl
- Non-flammable
Scroll down for more info
FEATURED VIDEO
Zap Plasti-Zap CA Brush-On 1/4oz
Zap Plasti-Zap CA Brush-On 1/4oz
Item #: 88761
Our Price $4.95
FEATURED VIDEO
Zap Plasti-Zap CA Brush-On 1/4oz
Uses: PLASTI-ZAP is a specialty CA adhesive developed for use on plastic and vinyl items. Most plastic modeling projects can be assembled with PLASTI-ZAP and very small amounts of ZIP KICKER. The special formula in PLASTI-ZAP allows it to screen out any mold release agents, resulting in a permanent bond in 15 to 30 seconds. The joint can be filed and sanded in a minute or so, allowing extra-fast assembly.
Helpful Hints: Apply small drops of PLASTI-ZAP to one surface only, then mate the parts. For large or long seams, apply small drops 1/4 to 1/2 inches apart on one side only, along the entire seam, then join parts. Be careful to keep your fingers away from the glued joints until cured, as this glue will bond your skin instantly to your model. For bonding chrome parts, scrape the chrome off of the areas to be bonded, then apply the glue to one side only. If you want to use ZIP KICKER, apply very small amounts with a fine brush or toothpick. You do not need to apply kicker to the entire joint. For critical applications, test sample joints for desired strength requirements.
Helpful Hints: Apply small drops of PLASTI-ZAP to one surface only, then mate the parts. For large or long seams, apply small drops 1/4 to 1/2 inches apart on one side only, along the entire seam, then join parts. Be careful to keep your fingers away from the glued joints until cured, as this glue will bond your skin instantly to your model. For bonding chrome parts, scrape the chrome off of the areas to be bonded, then apply the glue to one side only. If you want to use ZIP KICKER, apply very small amounts with a fine brush or toothpick. You do not need to apply kicker to the entire joint. For critical applications, test sample joints for desired strength requirements.