1.1 Lb Spool Dremel Pla Filament 1.75mm Spool, 10 Colors Available
Item #: 8657M
Our Price $29.97
| Filament Type | Color Choices Available | Suggested Extrusion Temperature | Heated Bed Needed? | Bed Temp | Strength | Typical Uses | Nozzle Size Needed |
|---|---|---|---|---|---|---|---|
| ABS | 0 | 230-240°C | Required | 110°C | ★★★ | Consumer products (Emits toxic fumes) unless Eco-Friendly | 0.4 |
| DURA | 6 | 175°C | Not Required | N/A | ★★★ | Replacement for ABS Strong, temperature resistant 3D parts | 0.4 |
| PLA | 10 | 180-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | N/A | ★★ | Consumer products | 0.4 |
| Advanced PLA | 10 | 195°C | Not Required | N/A | ★★ | Strong, temperature resistant 3D parts | 0.4 |
| WoodFill PLA | 1 | 195-220°C | Not Required | N/A | ★ | Design and prototyping, Decorative work | 0.4 |
| BronzeFill PLA | 1 | 195-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | 55-60°C | ★★ | Jewelry, Sculptures, Minitures. | 0.4 |
| CopperFill PLA | 1 | 195-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | 50-60°C | ★★ | Jewelry, Sculptures, Trophies | 0.4 |
| Stainless Steel PLA | 1 | 195-220°C | Advised (not required). If not used, must use Blue painter's tape for bed adhesion. | 55-60°C | ★★ | Jewelry, Sculptures, Trophies, Crafting | 0.4 |
| Magnetic Iron PLA | 1 | 190-210°C | Advised (not required) | 60-70°C | ★★ | Scensor Components, Compasses, Shielding | 0.6 |
| Carbon Fiber PLA | 1 | 195-220°C | Not Required | N/A | ★★ | Functional Prototypes, Automotive, frames, supports, propellers, drone parts and tools | 0.4 |
| Conductive PLA | 1 | 215-230°C | Not Required | N/A | ★★ | Functional Prototypes, toys and game | 0.4 |
| Alloy 910 Filament | 1 | 250-255°C | Not Required | N/A | ★★★ | Robotics, Jigs and Fixtures | 0.4 |
| Bridge Nylon | 1 | 250-255°C | Required | 70-80°C | ★★★ | Prosthesis, Robotic Assemblies | 0.4 |
| NinjaFlex | 5 | 225-235°C | Required | 20-50°C | ★★★ | Phone cases, toys, molded parts | 0.4 |
| SemiFlex | 1 | 225-235°C | Not Required | N/A | ★★★ | Prototypes , Unsupported Vertical Printing | 0.4 |
| GMASS Bismuth | 1 | 200-230°C | To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry. | 100°C | ★★ | Radiation shielding for imaging ,Vibration dampening , Laboratory equipment | 0.6 |
| GMAS Tungsten | 1 | 200-230°C | To improve adhesion to print bed, user may apply a small amount of acetone/ABS slurry. | 100°C | ★★ | Sporting goods, weighting, balancing, x-ray shielding, lab equipment, reactor shielding, vibration dampening and inertial weighting | 0.6 |
| iGUSi180 | 1 | 220-250°C | Required | 90-110°C | ★★ | Small batch manufacturing, Prototyping, Motion components, Bearings, Test Rigs | 0.4 |
| PCTPE | 1 | 230-245°C | Recommended Glass Plate | 45°C | ★★ | Bumpers, baffles, dampeners, Flexible structural components, Functional components | 0.4 |
| TechGPettG | 1 | 235-242°C | Must use a surface treatment such as blue painters tape | <68°C | ★★ | Engineering projects that require strength and accuracy. | 0.4 |
| tGlasePett | 2 | 232-238°C | Must use a surface treatment such as blue painters tape | <68°C | ★★★ | Industrial, Prototyping, and Hobbyist applications | 0.4 |
| ALGA | 7 | 195°C | Not Required | N/A | ★★ | Prototyping, educations, and artistic projects | 0.4 |
| OMNI | 6 | 195°C | Not Required | N/A | ★★★ | Strong, temperature resistant 3D parts that out perform standard PLA and ABS resolution | 0.4 |
WARNING: This product can expose you to chemicals including acetaldehyde, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.