Printed Graduations Beaker, 3000 Milliliter (101oz)
Lab quality large mixing beakers are a necessity when mixing large amounts of resins, rubbers and plaster materials for single or multiple mold filling.
These superior quality, reusable thick-wall polypropylene containers will make it easier than ever before. For example: fill 2 beakers (16 oz.) one with Part A and the other with Part B, mix them individually and then combine them both into 1 wide-mouth 32 oz. beaker for the final mixing. Also, they are designed with integrated non-drip low form tapered pour spouts to facilitate the transfer of materials so you can pour a thin line helping to eliminate the bubbles that create air pockets in rubbers and resins.
Note: If you use both Platinum and Tin based rubber molding materials, it is best that you order additional containers so as not to cross contaminate the materials which would affect curing performance.
8” tall by 7-1/8” wide. Graduated from 500 to 3000 mL in 500 mL increments.