Micro-Mark® Same Stuff & Applicator

SAME STUFF...Liquid Plastic Welder Formulated for the Plastic Modeler

 

• The same welder as ProWeld and Tenax-7R
• Solvent cement
• Uses capillary action to weld styrene, acrylic, butyrate, and ABS plastic
• Includes applicator brush built into the bottle cap
• Create tight seams in 15 seconds

Exactly the same as ProWeld and Tenax-7R, except for the name!
Solvent-type cement uses capillary action to weld styrene, acrylic, butyrate and ABS plastic. To apply, place the parts together and then put a drop on the seam. Hold for 15 seconds. In that amount of time, SAME STUFF bonds and starts to cure. This method is far superior to thicker plastic cement which is messy, harder to control and can damage expensive model kits.

2 fluid ounce refill. Includes applicator brush built into bottle cap.
 

The Touch-N-Flow Applicator lets you apply just the amount of liquid plastic cement, glue or C/A accelerator you need. How it works: Capillary action draws liquid into the glass tube. Touching the micro-tip to the joint causes the liquid to flow from the tube. Application is easily controlled and precisely positioned.
 
 Micro-Mark Tip
Our #60363 and #83514 Bellows-Type Applicators (available separately) are great for filling the Touch-N-Flow Applicator with liquid cement, such as Micro-Mark SameStuff.