Foam Fusion is the ultimate EPS foam glue! It permeates the foam and bonds around its cells. Other glues containing solvents will dissolve foam over time, but our formula is solvent-free. Our glue is not affected by heat or cold as with glue guns. It works with most rigid foams including Styrofoam, and many soft foams. Foam Fusion bonds foam to almost any porous surface and is easy to apply - simply brush squeegee on. Apply a very thin layer on each side - it goes a long way.

Coverage: 16 oz = 100 square feet (50 square feet x 2 sides). Note: Best to squeegee on a thin layer on both sides. A roller applies too much glue.

Scroll down for more info

Hot Wire Foam Factory Foam Fusion, 16 oz

Item #: 87641
$16.95

This item is backordered from our supplier. We will ship as soon as it is received. Your credit card will not be charged until shipped. Please Note: For shipments to locations outside the USA, backordered items must be placed on separate orders.

Ships by ground to 48 contiguous U.S. only.

Details

Foam Fusion is the ultimate EPS foam glue! It permeates the foam and bonds around its cells. Other glues containing solvents will dissolve foam over time, but our formula is solvent-free. Our glue is not affected by heat or cold as with glue guns. It works with most rigid foams including Styrofoam, and many soft foams. Foam Fusion bonds foam to almost any porous surface and is easy to apply - simply brush squeegee on. Apply a very thin layer on each side - it goes a long way.

Coverage: 16 oz = 100 square feet (50 square feet x 2 sides). Note: Best to squeegee on a thin layer on both sides. A roller applies too much glue.



Note: This item ships direct from California to contiguous 48 states only.

Ratings & Reviews

No reviews available

Be the first to Write a Review